Atlas Platinum PVL15 – 15,000 lb ALI Certified Heavy-Duty Overhead 2-Post Truck Lift
The Atlas Platinum PVL15 is a true heavy-hitter: an ALI certified, 15,000 lb capacity overhead 2-post lift designed for commercial shops and serious garages that routinely service larger trucks, fleet vehicles, and long wheelbase pickups. Extra tall, extra wide, and built with dual direct-drive hydraulic cylinders, this lift delivers the strength, stability, and working height you need for real heavy-duty service work.
Heavy-Duty Capacity for Work Trucks & Fleet Vehicles
Rated at 15,000 lbs, the PVL15 goes far beyond standard 9K and 10K lifts. It’s engineered to accommodate a wide range of vehicles within its rating: from service bodies and long wheelbase pickups to larger SUVs and loaded cargo vans, when properly positioned on the arms.
- 15,000 lb lifting capacity for heavy-duty trucks, service vehicles, and larger SUVs within rating.
- Designed to handle long wheelbase trucks and commercial vehicles in everyday shop use.
- Includes truck adapter set and screw-up frame adapters for tall frames and varied lift points.
Overhead 2-Post Design – Extra Tall & Extra Wide
The Atlas Platinum PVL15 uses an overhead design with an integrated padded shut-off bar, leaving the floor between the posts clear for jacks, stands, oil drains, and equipment. Extra height and width give you the space needed to position and lift larger work trucks comfortably.
- Overhead configuration with padded shut-off bar to help protect tall vehicles.
- Extra-tall columns with overall height about 174 1/2″.
- Overall floor width around 148″ with wide drive-thru clearance.
- Engineered as an ALI certified, commercial-grade lift for professional environments.
Direct-Drive Hydraulics & Premium Power Unit
Instead of chain-drive, the PVL15 uses dual direct-drive hydraulic cylinders for smooth, efficient lifting and fewer moving parts. It’s powered by a premium ALLY power unit, tested for electrical compliance in the U.S. and Canada for added peace of mind.
- Dual direct-drive hydraulic cylinders for stable, efficient lifting.
- Premium ALLY power unit designed for commercial-duty use.
- Dual-point lock release for positive control over mechanical safety locks.
- Heavy-duty 3/8″ equalization cables and robust column construction.
Working Height & Lift Range
The Atlas Platinum PVL15 is built to get big vehicles up where you need them. With adapters installed, you can reach a maximum lifting height of about 87 1/2″, giving excellent undercar clearance for stand-up work.
- Max lifting height (without adapters): approx. 72 3/4″.
- Max lifting height (with truck adapters): approx. 87 1/2″.
- Minimum arm/pad height: around 6″ to reach many trucks and SUVs.
- Multiple lock positions let you pick the most comfortable working height.
Who the PVL15 Is For
- Full-service automotive and truck shops needing a dedicated heavy-duty bay.
- Fleet maintenance operations working on service trucks, utility trucks, and cargo vans.
- Serious home or hobby garages with adequate space that want commercial-grade lifting capacity.
Key Features
- ALI certified overhead 2-post lift.
- 15,000 lb capacity – heavy-duty, commercial-grade rating.
- Extra tall & extra wide design for larger vehicles.
- Symmetric arms with professional-grade arm lock restraint system.
- Dual direct-drive hydraulic cylinders and heavy-duty equalization cables.
- Dual-point lock release with multiple mechanical lock positions.
- Truck adapter set & frame adapters included to handle a wide range of lift points.
- Premium ALLY power unit and mounting hardware included.
Technical Specifications
| Model | Atlas Platinum PVL15 |
|---|---|
| Lift Type | Overhead, symmetric, 2-post vehicle lift |
| Capacity | 15,000 lbs |
| Overall Height | Approx. 174 1/2″ (14′ 6 1/2″) |
| Overall Floor Width | Approx. 148″ (12′ 4″) |
| Outside Column to Outside Column | Approx. 135″ (11′ 3″) |
| Inside Column Width | Approx. 119 1/4″ (9′ 11 1/4″) |
| Drive-Thru Width | Approx. 107 1/2″ (8′ 11 1/2″) |
| Max Lift Height (No Adapters) | Approx. 72 3/4″ |
| Max Lift Height (With Adapters) | Approx. 87 1/2″ |
| Minimum Arm / Pad Height | Approx. 6″ |
| Column Size | Approx. 8″ x 14 1/2″ |
| Column Steel Thickness | Approx. 8 mm |
| Base Plate Size | Approx. 21″ x 48″ |
| Power Unit | Premium ALLY hydraulic power unit, 220V single phase (circuit size per manual) |
| Shipping Weight | Approx. 2,500–2,600 lbs |
| Included Accessories | 8-piece truck adapter set, frame adapters, mounting hardware |
All dimensions and specifications are approximate and may vary by production run. Always consult the current manufacturer manual for final measurements, electrical requirements, and installation guidelines before planning your bay.
Safety & Installation Guidance
A 15,000 lb lift must be installed and used correctly to perform safely. Dunfer strongly recommends:
- Professional installation by qualified, experienced lift installers.
- Verifying concrete thickness, strength, and condition meet or exceed the manufacturer’s minimum PSI and depth requirements.
- Confirming ceiling height, door clearance, and vehicle height (including racks and accessories) before purchase.
- Using correct OEM lifting points, balancing the vehicle properly, and engaging the mechanical safety locks before working underneath.
- Reading and following all procedures in the official installation, operation, and maintenance manuals.
Why Buy the Atlas Platinum PVL15 from Dunfer?
- Lift-focused store: Dunfer specializes in vehicle lifts and garage equipment for US garages and shops.
- Secure payment: check out confidently using PayPal.
- Safety-first approach: we emphasize proper installation, realistic capacity use, and clear specifications.
- Questions about fitment, layout, or power requirements? Contact our team at
contact@dunfer.com or
+1 332-278-8241.
If your shop or garage needs a dedicated heavy-duty bay for work trucks and larger vehicles, the Atlas Platinum PVL15 15,000 lb 2-post lift from Dunfer delivers the capacity, height, and durability you need for serious, everyday use.
Installation was a significant job, but now that the lift is fully set up and we’re used to it, I’m very happy with how it performs every day.
With the anchors fully set, the whole lift feels like it’s tied into the slab and structure. I have complete confidence working underneath it.
The lift itself is excellent. The only annoyance was that the freight truck arrived near the end of an already broad ETA window.
The lift feels incredibly solid in daily use. A couple of assembly steps in the manual were a bit vague, but we figured them out with extra care.
In use, the lift is flawless. The freight communication was fairly bare-bones, but everything still arrived when it was supposed to.