Katool KT-4H110 – 11,000 lb Extra-Tall 4-Post Parking & Service Car Lift
The Katool KT-4H110 is a heavy-duty 11,000 lb 4-post vehicle lift designed for drivers and shops that need real storage capacity and comfortable working height in the same footprint. With an 84.25″ max lifting height, extra-long platforms, and CE-certified construction, this lift is ideal for stacking vehicles, storing long wheelbase cars and trucks, and performing light service or detailing in a home garage or professional bay.
Heavy-Duty Capacity for Cars, SUVs & Light Trucks
With an 11,000 lb lifting capacity, the KT-4H110 is built to handle a wide range of vehicles within rating – from daily-driver sedans and sports cars to SUVs and many light trucks. The extended platform length and wide inside column spacing offer plenty of room for longer wheelbases and wider vehicles.
- 11,000 lb rated capacity – ideal for most cars, SUVs, and light trucks within spec.
- Extra-long platforms to accommodate extended wheelbase vehicles.
- Perfect for mixed-use garages: storage, display, and general service.
Extra Tall, Extra Long, Extra Wide 4-Post Design
The KT-4H110 is designed as an extra-tall, extra-long, extra-wide 4-post lift, giving you generous space both above and below the runways. With a maximum lifting height of about 84.25″, you can raise a vehicle high enough to park another one underneath or to stand and work comfortably for inspections and light maintenance.
- Max lifting height: 84.25″ – great undercar clearance and storage height.
- Overall length with ramps: 229.73″ – designed for longer vehicles.
- Overall width: 126″ with approx. 112.81″ between columns.
- Min runway height: 6.2″ – low enough for most modern vehicles to drive on.
- Non-skid diamond platforms for confident drive-on/drive-off traction.
CE-Certified Safety & Double-Lock System
Safety is built into the KT-4H110 from the ground up. The lift is CE approved and certified, designed to meet strict loading standards. It is tested to 115% dynamic load and 150% static load when installed and used correctly, and uses a robust multi-point locking system to secure the runways at height.
- Single-point manual safety lock release – one handle controls all four posts.
- Four mechanical locking devices, each with primary and secondary safety locks.
- Secondary lock system acts as a slack-cable safety in the event of cable failure.
- Adjustable safety lock ladders provide multiple working and storage positions.
- Power-side column can be installed on either side, front, or rear for flexible layout.
Parking, Storage & Light Service in One Lift
The KT-4H110 is more than a parking stand – it’s a complete parking-and-service platform. Use it to store an extra vehicle, keep a project car in the air, or create a comfortable work height for fluid checks, exhaust work, inspections, and detailing.
- Park a vehicle underneath the lift to reclaim garage floor space.
- Set a vehicle at working height for inspections and light maintenance.
- Jack tray included – place a bottle jack or floor jack on the tray to lift an axle for wheel and brake work.
- Two drip trays included – catch drips from the upper vehicle and protect the lower one.
Optional Caster Kit & Rolling Jacks
For even more flexibility, the KT-4H110 supports optional accessories (sold separately). A caster kit allows you to move the lift (when unloaded) around your garage, and rolling bridge jacks let you raise the wheels off the runways for tire, brake, and suspension work.
- Optional caster kit – move the lift around the garage when it’s not loaded.
- Optional rolling jacks – lift front, rear, or all four wheels off the runways.
- Standard package includes jack tray and two drip trays; casters and rolling jacks are extra.
Hydraulic Power & Operation
The KT-4H110 uses a high-quality hydraulic system designed for smooth, repeatable lifting. It is available with a 110V single-phase motor as standard, with an optional 220V motor configuration for shops that prefer or require 220V.
- Motor: 110VAC / 60 Hz / 1PH (220V / 60 Hz / 1PH optional).
- Lifting time: approx. 83 seconds up / 40 seconds down.
- High-quality hydraulic power unit for reliable daily use when properly maintained.
Key Features
- 11,000 lb lifting capacity for cars, SUVs, and most light trucks within rating.
- Extra-tall lifting height up to about 84.25″ for storage and service.
- Non-skid diamond plate runways and adjustable safety lock ladders.
- Single-point manual safety lock release with four mechanical safety locks.
- CE approved and certified, tested to 115% dynamic and 150% static load.
- Jack tray and two drip trays included for cleaner, more flexible storage.
- Optional caster kit and rolling jacks available for added mobility and wheel-free lifting.
- High-quality hydraulic system with 110V motor standard, 220V optional.
Technical Specifications
| Model | KT-4H110 |
|---|---|
| Lift Type | 4-post parking / storage / service vehicle lift |
| Lifting Capacity | 11,000 lbs (4,990 kg) |
| Max. Lifting Height | 84.25″ (2,140 mm) |
| Lifting Time | Approx. 83 s up / 40 s down |
| Height of Posts | 94.88″ (2,410 mm) |
| Overall Width | 126″ (3,200 mm) |
| Overall Length (with ramps) | 229.73″ (5,835 mm) |
| Inside Columns | 112.81″ (2,865 mm) |
| Minimum Runway Height | 6.2″ (157 mm) |
| Motor | 110VAC / 60 Hz / 1PH (220V / 60 Hz / 1PH optional) |
| Net Weight | 2,116 lbs (960 kg) |
| Certification | CE approved; tested to 115% dynamic and 150% static load |
| Recommended Concrete | Minimum 3.93″ (100 mm) thick, 3,000 PSI concrete |
| Included Accessories | Jack tray, two drip trays (casters and rolling jacks sold separately) |
All dimensions and specifications are approximate and may vary slightly by production run. Always refer to the current manufacturer manual for final technical data, clearances, and electrical requirements before planning your layout.
Safety & Installation Guidance
As with any vehicle lift, proper installation and operation are critical. This lift must be installed on suitable concrete and used according to the manufacturer’s instructions. Dunfer strongly recommends:
- Professional installation by qualified lift installers.
- Verifying concrete thickness (at least 3.93″ / 100 mm) and strength (minimum 3,000 PSI) before drilling.
- Confirming ceiling height, vehicle height, and garage layout before purchase.
- Reading and following the full installation, operation, and maintenance manuals.
- Using wheel chocks, correct lifting positions, and appropriate shop safety equipment at all times.
Why Buy the KT-4H110 from Dunfer?
- Lift-focused store: Dunfer specializes in vehicle lifts and garage equipment for US customers.
- Secure checkout: pay confidently using PayPal.
- Safety-first information: we emphasize realistic capacity use and responsible installation.
- Need help matching this lift to your garage? Contact us at
contact@dunfer.com or
+1 332-278-8241.
If you’re ready to add an 11,000 lb extra-tall 4-post lift that can handle storage and service in one package, the Katool KT-4H110 from Dunfer is a powerful, space-efficient upgrade for your garage or shop.
Installation was a significant job, but now that the lift is fully set up and we’re used to it, I’m very happy with how it performs every day.
With the anchors fully set, the whole lift feels like it’s tied into the slab and structure. I have complete confidence working underneath it.
The lift itself is excellent. The only annoyance was that the freight truck arrived near the end of an already broad ETA window.
The lift feels incredibly solid in daily use. A couple of assembly steps in the manual were a bit vague, but we figured them out with extra care.
In use, the lift is flawless. The freight communication was fairly bare-bones, but everything still arrived when it was supposed to.