Atlas PSP-6000 – 6,000 lb Portable Single-Post Car Lift, 110V

Atlas PSP-6000 – 6,000 lb Portable Single-Post Car Lift, 110V

The Atlas PSP-6000 is a versatile 6,000 lb portable single-post lift
designed for shops and home garages that want full-rise access without giving up permanent floor space. With its low-profile drive-over base, two-stage telescoping swing arms, and 110V power unit, this lift lets you move, position, and store vehicles efficiently—then roll the lift out of the way when the job is done.

Portable Single-Post Design

Instead of anchoring a full two-post or four-post lift into one bay, the PSP-6000 uses a heavy-duty rolling base and a single upright column. You can park the lift where you need it, set the arms under the vehicle, raise it to a comfortable height, and then roll the lift into a corner when you need the floor back.

• Portable single-post layout – roll it on a level concrete floor when not in use.
• Perfect for shops with shared bays and multi-use work areas.
• Great for home garages where a permanent two-post just isn’t practical.
• Column fits under many 9 ft (108″) ceilings, expanding where you can use it.

Built-In Drive-Over Ramp & Low-Profile Base

The PSP-6000 features a built-in drive-over ramp so vehicles can pass over the base when the lift isn’t in use. A low minimum height of about 5″ helps you position the lift under many modern vehicles without fighting clearance.

• Low 5″ minimum height for easier access under lower cars.
• Drive-over base and ramp maximize bay flexibility and parking options.
• Rigid base construction for stability when properly positioned on sound concrete.

Full-Rise Lifting for Real Undercar Access

With a maximum lifting height of about 71 2/3″ and roughly 68″ of clearance under the arms, this lift delivers true stand-up access for many users. It’s ideal for day-to-day service work on passenger cars, crossovers, and light trucks within its 6,000 lb rating.

• Max lifting height: about 71 2/3″ (5′ 11 2/3″).
• Max clearance under arms: about 68″ (5′ 8″).
• 16 mechanical locking positions for a range of working heights.
• Excellent for brakes, suspension, exhaust, general inspections, and detailing.

Two-Stage Arms & Screw-Up Truck Adapters

The Atlas PSP-6000 is equipped with two-stage telescoping swing arms that adjust to match a wide range of wheelbases and lift points. The lift also includes an 8-piece screw-up truck adapter set to help you reach higher frame rails and lift points on taller vehicles.

• Two-stage telescoping swing arms for flexible reach.
• Locking arm restraints help hold the arms in position under load.
• 8 screw-up truck adapters included – suitable for taller frames and trucks within rating.
• Adjustable pad spacing to accommodate different track widths and vehicle sizes.

Safety-Focused Construction

Safety is built into the PSP-6000’s column and carriage. A chain break safety mechanism is designed to automatically lock the carriage into place in the unlikely event of a chain failure, while multiple mechanical lock positions provide secure support at height.

• Chain break mechanism automatically locks the carriage if chain failure occurs.
• 16 mechanical locking positions provide multiple secure working heights.
• Single-point lock release simplifies lowering once the area is clear.
• Heavy-duty column and base structure designed for 6,000 lb rated capacity when properly used.

110V Single-Phase Power

The Atlas PSP-6000 runs on 110V single-phase power, making it easier to integrate into many US garages. A dedicated 30A circuit is recommended to support the electric-hydraulic power unit for consistent performance.

• 110V single-phase motor – no 220V required in most setups.
• Requires a dedicated 30A breaker (consult a licensed electrician).
• Hydraulic system uses 3–5 gallons of AW32 or AW46 hydraulic oil (typically not included).

Who the Atlas PSP-6000 Is For

• Home garages wanting a true full-rise lift in limited space.
• Shops that need an “extra” flexible bay for overflow service work.
• Detailers, tire shops, and specialty service providers who need to move a lift between work areas.
• Users who want to park over a low-profile base and roll the lift away when not in use.

Key Features

• 6,000 lb lifting capacity for many cars, SUVs, and light trucks within rating.
• Portable single-post design with rolling base.
• Low-profile drive-over ramp built into the base.
• Two-stage telescoping swing arms with locking arm restraints.
• Max lifting height: approx. 71 2/3″.
• Minimum pad height: approx. 5″.
• 16 mechanical lock positions.
• Chain break safety mechanism in the column.
• 8-piece screw-up truck adapter set included.
• 110V single-phase power unit (30A circuit recommended).

Technical Specifications

All specifications are approximate and may vary slightly by production run. Always refer to the current manufacturer’s manual for final technical data, clearances, and electrical requirements before planning your installation.

Safety & Installation Guidance

Any vehicle lift must be installed and operated correctly to perform safely. Dunfer strongly recommends:

• Using the lift only on level, properly cured concrete that meets the manufacturer’s requirements.
• Having all electrical work performed by a licensed electrician on a dedicated 110V / 30A circuit.
• Reviewing and following the full installation and operating manuals before first use.
• Positioning vehicles using the manufacturer-recommended lifting points and checking pad contact before lifting.
• Raising the vehicle to a lock position and verifying mechanical locks are engaged before working underneath.
• Using wheel chocks and appropriate personal protective equipment at all times.

Why Buy the Atlas PSP-6000 from Dunfer?

• Lift-focused store: Dunfer specializes in vehicle lifts and garage equipment for US customers.
• Secure payment: check out confidently using PayPal.
• Safety-first information: we emphasize realistic capacity use and proper installation.
• Need help confirming ceiling height, layout, or power requirements? Contact us at
  contact@dunfer.com or
  +1 332-278-8241.

If you’re looking for a full-rise, 6,000 lb portable single-post lift that can move with your workflow instead of locking down a bay, the Atlas PSP-6000 from Dunfer is a powerful, flexible solution for both home garages and professional shops.