BendPak LR-10000 – 10,000 lb ALI Certified Low-Rise Scissor Lift
The BendPak LR-10000 is a heavy-duty 10,000 lb low-rise scissor lift engineered for fast wheel, brake, and general service on today’s passenger cars, SUVs, and light trucks. With a low collapsed height, compact footprint, and powerful dual-cylinder hydraulic system, it’s a great fit for busy shops and serious home garages that want quick undercar access without installing a full-rise lift.
Low-Rise Design for Fast Service
This low-rise scissor lift is built to speed up tire, brake, and suspension work while keeping your bay open and easy to maneuver around. Vehicles drive up the diamond-plated approach ramps onto full-length rubber-topped platforms, giving you solid contact at the proper lifting points.
- Ideal for tire, brake, wheel, and quick maintenance work.
- Perfect for detailing, bodywork prep, and undercar inspections.
- Compact layout helps keep the bay clear and easy to work around.
- Great fit for home garages that want more capability than jacks and stands.
Low Collapsed Height & Strong Lifting Range
A low collapsed height of about 4–4.5″ allows the LR-10000 to accommodate low vehicles as well as taller trucks and SUVs. With the platforms fully raised you’ll have about 23″ of lift, or up to 32″ with rubber lift blocks, providing a comfortable working height for wheel and undercar service.
- 10,000 lb lifting capacity for many cars, SUVs, and light trucks within rating.
- Approx. 4–4.5″ lowered height to work with low-clearance vehicles.
- 23″ lifting height at the platforms; up to 32″ with blocks.
- Multiple lock positions so you can choose the most comfortable working height.
Full-Length Platforms, Rubber Tops & Adapters
The LR-10000 uses full-length, rubber-topped platforms that spread the load and help protect vehicle underbodies. A set of multi-height rubber-topped adapters is included to give you flexibility for frame and unibody contact points.
- Full-length rubber-topped platforms for stable, non-slip contact.
- Drive-over ramps and side rails increase usable width for wider vehicles.
- Multi-height rubber-topped adapters included for more lift-point options.
- Built-in storage trays keep lug nuts and small parts within easy reach.
Rugged Construction & Safety Features
The LR-10000 is built around a rugged steel channel frame with dual hydraulic cylinders and a flow divider to keep lifting smooth and level. A single-point safety release and multiple mechanical locking positions support safe operation when used correctly.
- Dual hydraulic cylinders provide stable, even lifting.
- Industrial-grade hydraulic cylinder with flow divider for level ascent and descent.
- Single-point safety lock release with “dead-man” style controls for safe lowering.
- Multiple mechanical lock positions to secure the lift at height.
- Rugged steel channel frame built to demanding industry standards.
ALI Certified Low-Rise Lift
The LR-10000 is an ALI certified low-rise lift model, giving shops and technicians added confidence that it meets recognized design and testing standards when installed and operated according to the manufacturer’s instructions.
- ALI certified low-rise design in the 10,000 lb capacity class.
- Designed for professional service environments and serious home users.
- Backed by BendPak’s experience in commercial lifting equipment.
Power & Operation
The LR-10000 uses a dedicated 208–230V single-phase electric-hydraulic power unit for quick and consistent lifting. Controls are positioned for easy access, with a safety-focused operating sequence to help keep lowering smooth and level.
- Electric motor: approx. 208–230VAC, 50–60 Hz, single phase.
- Electric-hydraulic power unit for smooth raising and lowering.
- Typical lift time of about 35 seconds to full height.
- Requires a properly sized dedicated circuit installed by a qualified electrician.
Who the BendPak LR-10000 Is For
- Shops focused on wheel, brake, and quick service work that need a robust low-rise lift.
- General repair shops adding a dedicated tire/brake bay without a full-rise lift.
- Home enthusiasts who want professional-grade low-rise lifting in a compact footprint.
- Detail and body shops needing easier undercar and lower-panel access.
Key Features
- 10,000 lb capacity low-rise scissor lift.
- Approx. 4–4.5″ collapsed height for low vehicles.
- 23″ lifting height (up to 32″ with blocks).
- Full-length rubber-topped platforms with diamond-plated ramps.
- Drive-over ramps and side rails for wider vehicles.
- Multi-height rubber-topped adapters included.
- Single-point safety release with multiple lock positions.
- Dual hydraulic cylinders and rugged steel channel frame.
- ALI certified model for added assurance.
Technical Specifications
| Model | LR-10000 |
|---|---|
| Lift Type | Low-rise scissor lift |
| Lifting Capacity | 10,000 lbs |
| Max Capacity / Front Axle | 5,000 lbs |
| Max Capacity / Rear Axle | 5,000 lbs |
| Lifting Height | 23″ (platforms) |
| Lifting Height with Blocks | 32″ |
| Collapsed / Lowered Height | Approx. 4–4.5″ |
| Locking Positions | Multiple positions from approx. 14″ up to 22.75″ |
| Overall Pad Length | 53″ |
| Overall Pad Width | 24″ |
| Overall Length | 82.65″ |
| Overall Width | 85″ |
| Lift Time | Approx. 35 seconds |
| Power Unit | 208–230VAC / 50–60 Hz / 1 phase |
| Shipping Weight | Approx. 1,330–1,350 lbs |
All specifications are approximate and may vary slightly by production run. Always consult the current manufacturer manual for final dimensions, clearances, and power requirements before planning your installation.
Safety & Installation Guidance
Any lift must be installed and operated correctly to perform safely. The LR-10000 should be set up on suitable, properly cured concrete and wired by qualified personnel to a correctly sized electrical circuit.
- Have installation and setup performed or verified by qualified lift technicians.
- Confirm concrete thickness, strength, and condition meet the manufacturer’s minimum requirements.
- Use a dedicated 208–230V single-phase circuit sized per the power unit’s requirements.
- Always position pads at approved lifting points and verify contact before raising.
- Raise the lift to a mechanical lock position before working underneath.
- Use wheel chocks and appropriate personal protective equipment at all times.
Why Buy the LR-10000 from Dunfer?
- Lift-focused store: Dunfer specializes in vehicle lifts and garage equipment for US garages and shops.
- Secure checkout: pay confidently using PayPal.
- Safety-first approach: we emphasize realistic capacity use, proper installation, and clear specs.
- Need help matching this low-rise scissor lift to your space? Contact us at contact@dunfer.com or +1 332-278-8241.
If you’re looking for a 10,000 lb ALI certified low-rise scissor lift to power fast wheel and brake service in a compact bay, the BendPak LR-10000 from Dunfer is a proven, high-capacity solution for your Scissor Lifts lineup.
Installation was a significant job, but now that the lift is fully set up and we’re used to it, I’m very happy with how it performs every day.
With the anchors fully set, the whole lift feels like it’s tied into the slab and structure. I have complete confidence working underneath it.
The lift itself is excellent. The only annoyance was that the freight truck arrived near the end of an already broad ETA window.
The lift feels incredibly solid in daily use. A couple of assembly steps in the manual were a bit vague, but we figured them out with extra care.
In use, the lift is flawless. The freight communication was fairly bare-bones, but everything still arrived when it was supposed to.